mod6courseproject_020624

.docx

School

Rasmussen College *

*We aren’t endorsed by this school

Course

2522C

Subject

Information Systems

Date

Feb 20, 2024

Type

docx

Pages

8

Uploaded by ConstableStingray2882

Cisco Network Routing Module 06 Project Template SomeCompany wants to deploy three routers to allow communication between the 3 buildings on their campus. The CTO wants the routers configured to allow the maximum number of available IP addresses in each department subnet, using the Class B address space: 172.18.0.0. It is time to compile an executive summary on the entire proposal. Using the sections below, update info from the relevant parts of the course project, taking into account feedback on the previous assignments. (Note: because of timing, there will likely be no updating to the ACL portion of the configuration.) Use this information to complete the Executive Summary Customer requirements After experimenting with a floor based subnet scheme, the SomeCompany CTO has decided to subnet based on the departments in each building. The tables, network map, and router configuration will assist in meeting the customer requirements. Complete tables to should show the subnets intended for each department. Complete tables to assist in configuring the interfaces on the three routers. Provide a network map showing the topology and configuration information o Three routers are connected in a mesh topology o The department switches are connected to the designated building router as outlined in the configuration tables o All interfaces on the routers should be labeled with both the interface designation and the assigned IP Address Note, the serial connections between routers should be in their own subnets. We do not need to worry about the IP Addresses of the department switches, though they should be labeled with the department name. Configure the Building 1 and Building 2 routers with either OSPF or EIGRP o Each interface should be configured separately Configure ACL on Building 2 router o Only those computers on the HR subnet should have access to the Payroll subnet o There should be no limitation on access to the HR Subnet.
Building 1 Subnet Department Subnet ID Host ID Range Broadcast Address 0 Warehouse 172.18.0.0 172.18.0.1-.15.254 172.18.15.255 1 Receiving 172.18.16.0 172.18.16.1-31.254 172.18.31.255 2 Shipping 172.18.32.0 172.18.32.1-.47.254 172.18.47.255 3 Maintenance 172.18.48.0 172.18.48.1-.63.254 172.18.63.255 Building 2 Subnet Department Subnet ID Host ID Range Broadcast Address 4 Accounting 172.18.64.0 172.18.64.1-.79.254 172.18.79.255 5 Human Resources 172.18.80.0 172.18.80.1-.95.254 172.18.95.255 6 Payroll 172.18.96.0 172.18.96.1-.111.254 172.18.111.255 7 MIS 172.18.112.0 172.18.112.1-.127.25 4 172.18.127.255 8 Employee Training 172.18.128.0 172.18.128.1-.143.25 4 172.18.143.255 Building 3 Subnet Department Subnet ID Host ID Range Broadcast Address 9 R&D 172.18.144.0 172.18.144.1-.159.254 172.18.159.255 10 Marketing 172.18.160.0 172.18.160.1-.175.254 172.18.175.255 All Department Subnet Mask: 255.255.240.0
Routers Provide IP Address and subnet mask for the router interfaces that connect to each department switch. Also, configure the router serial connections with IP Addresses to assure communication between the routers. (Note, not all interfaces will be configured with an IP Address.) Building 1 Router Ethernet and Serial Interfaces IP Address Subnet Mask Router Fast Ethernet 0/0 172.18.0.1 255.255.240.0 Building 1 Fast Ethernet 0/1 172.18.16.1 255.255.240.0 Building 1 Fast Ethernet 0/2 172.18.32.1 255.255.240.0 Building 1 Fast Ethernet 0/3 172.18.48.1 255.255.240.0 Building 1 Fast Ethernet 0/4 Building 1 Fast Ethernet 0/5 Building 1 Fast Ethernet 0/6 Building 1 Fast Ethernet 0/7 Building 1 Serial 0/0 172.18.191.24 5 255.255.240.0 To Building 2 Serial 0/1 172.18.223.24 5 255.255.240.0 To Building 3
Your preview ends here
Eager to read complete document? Join bartleby learn and gain access to the full version
  • Access to all documents
  • Unlimited textbook solutions
  • 24/7 expert homework help